Despite being recently facelifted, the first generation of the Tatra Terrno is still sold along side with the new model. While the new versions received a fresher design, the old Terrno continues to look dated and features a pretty spartan cab.
The truck was built for extreme conditions and it features a high ground clearance and heavy duty axles which permits it to tackle the harshest terrains with poise.
At the heart of the Tatra Terrno 1 sits a directly air-cooled Tatra on Airtm engine which offers plenty of power and torque to play with. To suit a wide range of applications, the medium duty Terrno 1 is available in 4x4, 6x4, 6x6 and 8x8 configurations.
Tatra is highly appreciated for its solid and rugged trucks. While there are a lot of fire trucks out there, there aren’t many models that can stack up with confidence against the 815 model build by Tata.
The most important weapon needed in firefighting operations, is without a doubt the water tender truck. The volume of water that can be carried by a fire truck could make the difference between a few pieces of burned wood or a full scale inferno and at this part Tatra’s truck receives high marks being able to transport up to 9000 l of water.
The Tatra T 815 water tender is built by THT, s.r.o. Polička, a leading Central European specialist in firefighting vehicles. Using the newest Tatra chassis, the fire truck it is designed to transport large quantities of extinguishing agents and 1+3 firefighting crew.
The Tatra Jamal is a three-axle truck with conventional cab configuration which is available as a tipper or construction dump designed to tackle the most difficult construction sites.
This vehicle is part of the heavy duty category engineered for off-road operation and off-road transport of loads. The truck’s body volume is 14 m3 with a payload of approximately 24 t. The Jamal can be also driven or public roads, but the signaling lights must be permanently on.
Powered by a 12 litre, air cooled, turbocharged V8, 440 hp diesel engine the Jamal has the potential to deal with the biggest payloads and the hardest working conditions without backing down.
In 2009 the old Tatra Terrno 1 benefitted from a small facelift, as it received improved aerodynamics and a host of technical upgrades.
The Terrno 1 features a cab over engine configuration and is offered with a choice of 4x4, 6x4, 6x6 and 8x8 drives. Due to its versatile character, the medium duty truck can be used for various applications on any terrains as its King Frame combined suspension (mechanical leaf or coil springs and high-pressure air bellows) gives it capable off road abilities.
One of the toughest trucks built by Western Star is the 6900 model which can haul loads of up to 500.000 pounds. Designed as a severe duty vehicle the Western Star 6900 has a strong build quality and an imposing character.
The truck is also highly versatile and comes with a wide range of options which permit you to customize it according to specific needs. Thanks to its flexible character the Western Star 6900 is also available with twin steer configuration and can be use for long haul, construction, mining, logging, oil or gas and towing or recovery applications.
To be able to get its heavy duty tasks without thinking twice the 6900 is offered with a choice of Detroit diesel engines which can develop up to 600 hp and 2050 lb ft of torque.
The CT660 model is the first vocational truck built by Cat for the American market. Caterpillar has already a solid experience in building construction equipment and despite the fact that many people still consider its new model just an International with a new hood and another badge, the CT660 is able to make a compelling case for itself.
Available with a wide range of specifications, it can be configured to match almost any vocational application required as it’s ready to go head to head with the toughest jobs as a dump truck, concrete mixer, waste carrier or all-around heavy hauler.
The truck is priced at $157000 and is offered with a choice of two CAT CT engines based on MaxxForce units which develop between 330 – 475 hp.
The Renault Kerax was developed to be able to operate under the most demanding working conditions. With a maximum payload of up to 30 tonnes for the heavy duty model, the rugged Kerax is one of the most capable trucks build by the French manufacturer. The truck features new drive axles and double reduction tandems which gives it astonishing performances for both on- and off-road missions.
The vehicle is available in 3 cab configurations (Day, Global, Sleeper) and offers both manual and automated transmissions. To offer maximum versatility the truck is available in both tractor and rigid versions with different wheel bases and axels configurations (4x2, 4x4, 6x4, 6x6 and 8x4). Renault Kerax is particularly suited to activities in the construction sector such as earth moving, demolition or heavy equipment transport.
If you need a truck that is not afraid to deal with tough terrains, muddy roads and huge payloads without being wreaked or tear into pieces, than you might want to take a closer look at the Volvo FMX.
The FMX is the tough brother of the FM model which has a more serene character and was designed only for regional transportation. In order to make the FMX fit for its challenging missions Volvo has modified the FM’s chassis, equipped it with specific features and dropping heavy duty equipments into the mix.
The result is a masterpiece of the construction trucks segment were the Volvo FMX competes against similar rugged models like the Mercedes Axor, Iveco Trakker, MAN TGS or DAF CF. The Volvo FMX is available in three cab configurations namely the Day cab, Sleeper Cab and Globetrotter. Besides the generous range of cabs the truck versatility is also represented by its wide choice of axles which consists of 4x2, 6x2, 6x4, 4x4, 6x6, 8x2 and 8x4 versions available in both rigid and tractor models.
The Volvo FM was developed for regional transports and it was completely redesigned in 2010 when it received a few exterior changes, a fresh engine lineup and a host of new interior features. Over the years Volvo has managed to gain a good reputation thanks to its reliability and the strong build quality, but the new FM moves this heritage even further with a lot of useful improvements and good fuel efficiency.
The FM is offer six cab models naming the Day Cab, Sleeper Cab, Low Sleeper Cab, Globetrotter, Globetrotter LXL and Fire engine Crew Cab. The truck’s versatility is also represented by the wide range of axle configurations - 4x2, 6x2, 6x4, 4x4, 6x6, 8x2, 8x4 – available for both rigid and tractor versions.
One of the most appreciated truck manufacturers from all over the world is Scania. These trucks offer a great value for money and they also have excellent performances combined with low fuel consumption. Their build quality is top notch and they are born to carry massive payloads for long hauls in maximum safety.
The jewel crown of the Scania range is the R Series which competes in the premium 44 tonnes segment against models like the Mercedes Actros orVolvo FH. The R Series was redesigned and upgraded in 2010 when has received both style and technical upgrades. In the same year the Scania R Series was also named the International Truck of the Year. The truck is available in four cab configurations including Day Cab, Sleeper cab Low, Sleeper Cab Normal Sleeper Cab high and Topline.